PassionHome installation service

Wired Doorbell Camera Installation for HDB BTO Flats in Singapore

Never change doorbell batteries again. We connect your doorbell camera to your flat’s hidden doorbell wiring with a 12V or 24V power driver and neat trunking, so it stays on 24/7 and never goes dead while you are on holiday.

Best pricing for BTOs completed in the last ten years with an existing doorbell point. Older flats quoted case by case.

Electrician-performedElectrical work carried out by an electrician
Driver supplied12V or 24V power driver matched to your camera
No wall hackingNeat surface trunking to the nearest power source
Any 12V/24V cameraAqara or other brands, bought here or elsewhere
The hidden wire

Your BTO is already wired for a doorbell

Here is the part most owners never discover: when HDB builds a BTO flat, a doorbell wire is run from the front door into the kitchen. In most BTO flats completed over roughly the last ten years, that wire ends in the kitchen connected to nothing. It was meant for a simple battery-operated chime unit that almost nobody installs.

That unused run of wire is exactly what a wired doorbell camera needs. Instead of leaving it dead in the wall, we connect it to a compact power driver so your camera gets clean, continuous 12V or 24V power. No batteries involved, ever again.

What the service includes

Driver supplied and fitted — an ultra-slim 12V DC power driver (S$59) or 24V equivalent, matched to your camera.

Neat surface trunking — from the doorbell point in the kitchen to the nearest power source. No hacking.

Mounting, app setup and testing — camera mounted and angled at the front door, paired in its app, chime and live view tested.

Why go wired

Why wired beats battery for a doorbell camera

Battery doorbells share one weakness: the battery. Wired power removes it completely.

🛡️

Never dies on holiday

A battery doorbell that runs flat mid-trip leaves your front door unwatched exactly when you want eyes on it. Wired power removes that failure mode.

🎥

24/7 continuous recording

On the Aqara G410, 24/7 continuous recording to a microSD card is only available in wired mode. Battery mode records events, not a continuous timeline.

🔋

Nothing to recharge

Battery doorbells need a swap or recharge every few months. On wired power there is nothing to replace, and wired mode also unlocks RTSP for Home Assistant on the G410.

Cameras we install

Doorbell cameras that work with this service

We install any wired doorbell camera that accepts 12V or 24V power, including models you already own. Buying new? These are the two we stock and recommend.

Aqara Doorbell Camera Hub G410, 2K doorbell camera with 12V to 24V wired powerDoorbell + Hub
Aqara

Aqara Doorbell Camera Hub G410

S$309

2K doorbell that is also a full smart-home hub (Matter Controller, Thread Border Router and Zigbee hub in one). Accepts 12–24V AC or DC; wiring it unlocks 24/7 recording and RTSP. mmWave radar and on-device face recognition.

View the G410 →
Aqara Doorbell Camera G400 Wired, battery-free 2K doorbell with IP65 ratingIP65 wired-only
Aqara

Aqara Doorbell Camera G400 (Wired)

S$249

Battery-free, wired-only 2K doorbell with a published IP65 rating and a tall face-to-floor view. Accepts 8–24V AC or DC, or PoE. Ships with its own plug-in chime (does not work with an old mechanical chime).

View the G400 →

Also see the G410 vs G400 guide, the G410 weatherproof case for exposed doors, and the full Aqara Singapore range.

Quick comparison

Wired install at a glance: G410 vs G400

Both work with our installation service and with the 12V driver we supply.

Wired installAqara G410 (S$309)Aqara G400 Wired (S$249)
Wired power input12–24V AC / DC8–24V AC / DC, or PoE
Battery optionYes: 6 × AA (up to ~5 months)No: battery-free, wired only
Weather ratingNo published IP (case available)IP65 (published)
ChimeIndoor Chime/Hub included (USB-C)Own plug-in chime included
Smart-home hub built inYes: Matter + Thread + ZigbeeNo: camera doorbell only
How it works

From WhatsApp to a doorbell that never dies, in one visit

  1. WhatsApp us

    Send your block and street, flat type, completion year if you know it, and the doorbell camera model you have or plan to buy.

  2. We confirm and quote

    We confirm your doorbell point and quote the installation. Newer BTOs with the prewired point get our best rate; older flats are quoted case by case.

  3. Electrician installs

    The driver is fitted at your kitchen doorbell point, wiring is run in neat trunking to the nearest power source, and your camera is mounted at the door.

  4. Set up and tested

    We pair the camera in its app, test the chime, motion detection and live view before we leave. No more batteries, ever.

FAQ

Wired doorbell installation, answered

Is my HDB BTO already wired for a doorbell?

Most BTO flats completed in roughly the last ten years have a doorbell wire prewired by HDB, running from the front door and ending in the kitchen. It is usually connected to nothing, because it was meant for a battery-operated chime that few owners ever install. WhatsApp us your block and completion year and we will confirm before quoting.

Does the installation involve hacking my walls?

No. We use your existing doorbell wiring where it is available, and run any new wiring in neat surface trunking from the kitchen doorbell point to the nearest power source. There is no hacking of walls.

Can you install a doorbell camera I bought elsewhere?

Yes. The service works with any wired doorbell camera that accepts 12V or 24V power, not just the models we sell. Send us the exact model on WhatsApp and we will confirm compatibility and the right driver before you book.

Which Aqara doorbell should I choose for a wired install?

Choose the Aqara Doorbell Camera Hub G410 if you want the doorbell to double as your smart-home hub, with 24/7 continuous recording unlocked in wired mode. Choose the Aqara Doorbell Camera G400 (Wired) if you already have a hub and want a battery-free doorbell with a published IP65 weather rating at a lower price.

What if my flat is older and has no doorbell point?

We still install wired doorbell cameras in older HDB flats. The wiring route just has to be planned around your entrance, so we quote these case by case. WhatsApp us a photo of your front door area and we will advise.

Do I still need to change batteries after going wired?

No. On wired power the camera draws power continuously from the driver, so there are no batteries to swap or recharge, and the doorbell does not go dead while you are away or on holiday.

Book your installation

No more dead doorbells

Driver, trunking, mounting and setup, done by an electrician in a single visit. Best pricing for newer BTOs with an existing doorbell point.

Message us: “Hi PassionHome, I would like a quote for wired doorbell camera installation at [your block + street].”
PassionHome — your trusted smart home and living partner since 2017.
Authorised Aqara Dealer. Wired doorbell camera installation across Singapore.
By appointment: Lobby D, #07-72, 10 Ubi Crescent, Ubi Tech Park, Singapore 408564.
Get a quote on WhatsApp
WhatsApp: +65 9051 7063
Send your block, flat type and camera model.