Aqara Water Leak Sensor T1 – Global Edition

$33.00

IP67 Zigbee 3.0 leak sensor that alarms at 0.5 mm of water — phone alerts and hub siren through an Aqara hub, automatic shut-off with the Valve Controller T1, two years on one CR2032, nothing to install.

SKU: AQ83-AqaraWaterLeakSensor-T1(2Years) Categories: , Brand:

Description

The Aqara Water Leak Sensor T1 (model WL-S02D) is a 50 mm Zigbee 3.0 puck that sits on the floor under a sink, washing machine or water heater and raises the alarm the moment 0.5 mm of water bridges its two probes. Through an Aqara hub it pushes a notification to your phone, sounds the hub siren and can trigger automations — including closing the supply with an Aqara valve controller. IP67 rated, two years on one CR2032, no wiring. Sold by PassionHome — your Authorised Aqara Dealer in Singapore — at S$33 with the official 24-month Aqara warranty.

Aqara Water Leak Sensor T1 — detects floods and protects your property, IP67, local and remote alarm

Why buy the Aqara Water Leak Sensor T1 in Singapore

  • Catches leaks at 0.5 mm. Two probes on the underside complete a circuit as soon as a thin film of water reaches them — long before a puddle spreads to the parquet or the neighbour below.
  • An alert you actually see. With an Aqara hub the leak becomes a push notification in Aqara Home and Apple Home, plus the hub’s own siren, so a burst hose while you are at work is not discovered at 7 pm.
  • Can shut the water off. Pair it with the Aqara Valve Controller T1 on the inlet and an automation closes the supply automatically when a leak is detected.
  • Built for wet places. IP67 dust- and water-resistant with a UV-resistant shell, 0–100% RH rated, so a service yard or bathroom floor is fine.
  • Two years on a coin cell, placed loose on the floor — no adhesive, no screws, nothing to install.
  • Authorised dealer stock. Official 24-month Aqara manufacturer warranty, serviced in Singapore through the Aqara Service Center. Estate group-buy pricing is available when your estate unlocks it.

How the sensor detects water

Aqara Water Leak Sensor T1 alarming on a wooden floor when it detects flooding — leak detected, app notification, sound alarm

The T1 uses the electrical conductivity of water. Two metal probes on the base form a current loop the instant water touches both of them, and Aqara states the alarm triggers at a water level of just 0.5 mm. The sensor reports the leak to the hub, which sounds its alarm, sends the notification and runs whatever automations you have attached.

Aqara Water Leak Sensor T1 splashing into water — IP67 waterproof rating for humid and dusty environments

The distributor rates the sensor IP67 with a UV-resistant shell and Aqara rates it for 0–100% RH, which matters in Singapore: the places you want to monitor — under the kitchen sink, beside the washing machine in the service yard, below the storage water heater — are exactly the humid, occasionally wet spots that kill ordinary electronics.

From alert to automatic shut-off

Automation: Aqara Water Leak Sensor T1 triggers the Aqara hub to close a water valve when a leak is detected

The most useful automation is the simplest: IF leak detected THEN close the valve. Aqara’s Valve Controller T1 mounts on the washing-machine or heater inlet valve, so a hose failure is stopped within seconds rather than running until someone gets home. On the same hub, the sensor can also switch off the water heater or turn on the lights so you can see what happened.

Aqara Water Leak Sensor T1 status shown in the Apple Home app on iPhone, Apple Watch and iPad

Through the hub, the sensor appears in Apple Home as a leak sensor, so Apple Home automations and notifications work alongside Aqara Home’s. The same alert layer carries the Smart Smoke Detector, Smart Gas Detector and Door and Window Sensor T1, which is why one Aqara hub tends to grow into a whole-flat safety system.

Installing the Water Leak Sensor T1 in a Singapore home

Aqara Water Leak Sensor T1 placement examples: washroom, basement, kitchen and balcony

Where to put it

There is nothing to mount — Aqara’s instruction is simply to place it on the surface you want monitored, probes down. In a typical HDB or condo that means the cabinet floor under the kitchen sink, the floor beside the washing machine inlet in the service yard, under the storage heater in the bathroom, and near the aircon fan-coil drain tray if you have had condensate leaks before. Keep it off metal surfaces, which interfere with the Zigbee signal, and within reach of the hub — Aqara lists distance, battery and metal as the three causes of a sensor going offline.

Aqara Water Leak Sensor T1 with other Aqara accessories for home automation scenes

Which hub do I need?

An Aqara hub is mandatory — the T1 cannot be used on its own. The Smart Hub M100 is the value pick with a built-in siren, the Hub M3 is the flagship with Matter and Thread, and the Hub E1 is a compact USB stick if you have no need for a siren. One hub supports up to 32 accessories. If you want help choosing where to place sensors in your flat, message us on WhatsApp at +65 9051 7063.

Exploded view of the Aqara Water Leak Sensor T1 — replaceable CR2032 battery, two-year life

Battery and button

One CR2032 gives about two years of use and is user-replaceable. The single button sits under the water-drop icon in the centre of the shell, which is also where the Zigbee antenna is; press it by holding the top and bottom halves and pressing the icon.

Specifications (WL-S02D)

SpecificationDetail
ModelWL-S02D
TypeZigbee 3.0 water leak / flood sensor
DetectionConductivity probes; alarm at 0.5 mm water level
Ingress protectionIP67 (per Singapore distributor); UV-resistant shell
WirelessZigbee 3.0; Aqara hub required (cannot be used standalone)
EcosystemsAqara Home; Apple Home via Aqara hub
Battery1 × CR2032, about 2 years
Dimensions50 × 50 × 15 mm
Operating temperature0°C to 55°C
Operating humidity0–100% RH
InstallationPlace on the surface to be monitored; no mounting hardware

What is in the box

Water Leak Sensor T1 ×1 (battery fitted), user manual ×1.

Warranty and authorised-dealer details

PassionHome.sg is an Authorised Aqara Dealer in Singapore, listed on Aqara’s official partner network. All Aqara products sold here:

  • Carry the official 24-month Aqara manufacturer warranty
  • Are sourced direct from Aqara distribution channels — never grey-market
  • Are covered by Singapore-based warranty service through the Aqara Service Center — no overseas RMA

Warranty term is 24 months from the purchase date. For a warranty claim on your Water Leak Sensor T1, the unit goes to the Aqara Service Center, Singapore’s official Aqara warranty service location. PassionHome can guide you through the process if you run into any issues — reach out on WhatsApp at +65 9051 7063.

Frequently asked questions

Can the Aqara Water Leak Sensor T1 be used on its own?

No. Aqara states it must work with a hub — the hub provides the notifications, the siren and the automations.

How much water does it take to trigger the alarm?

Aqara states the alarm triggers when the water level reaches 0.5 mm across the two probes on the underside.

Is it waterproof?

Yes. The Singapore distributor rates it IP67 dust- and water-resistant with a UV-resistant shell, and Aqara rates it for 0–100% RH.

Can it turn off the water supply?

Yes, with an Aqara Valve Controller T1 fitted to the inlet valve and an automation in Aqara Home: when the sensor detects a leak, the hub closes the valve.

Does it work with Apple Home?

Yes, through an Aqara hub — it appears in the Apple Home app as a leak sensor for notifications and automations.

Where should I place it in a Singapore flat?

Under the kitchen sink, beside the washing-machine inlet in the service yard, under the storage water heater, and near aircon drain trays that have leaked before. Place it probes-down on the floor, away from metal surfaces.

Why does it go offline?

Aqara’s checklist: too far from the hub, a low or dead battery, or placement on a metal surface that interferes with the signal.

How long does the battery last?

About two years on one CR2032 under normal use; the cell is user-replaceable.

Where is the button?

In the centre of the shell under the water-drop icon. Hold the top and bottom covers and press the icon. The Zigbee antenna is directly under the same icon.

Is there a local warranty?

Yes. Every Aqara product sold by PassionHome carries the official 24-month Aqara manufacturer warranty, with service in Singapore through the Aqara Service Center — no overseas RMA. Message us on WhatsApp at +65 9051 7063 if you need help with a claim.

Related Aqara products